China 3L Cool Mist Adjustable Nozzle Air Humidifier Manufacturers, Suppliers, Factory

A larger volume and share: the Allerair air purifier of high quality alloy steel housings is larger than the general light air purifier. Its 5000 Series, 6000 Series, 8000 Series, not only large, and this cylindrical housing is designed with the wind turbine structure, ensuring efficient use of internal space. A larger volume and component ensure that the Allerair air purifier can operate reliably in severe contamination.

1. Disconnect power and empty standing water: Before starting to clean the humidifier, always make sure the power supply is completely disconnected to avoid the risk of electric shock. At the same time, pour out any standing water inside the humidifier to ensure the interior is dry. 2. Disassemble and Initial Flush: Please take out the humidifier's water tank, filter, mist guide tube and other removable parts, and carry out preliminary rinsing with clean water. 3. Scrub the detail parts: It is recommended to use a soft bristle brush or cotton swab dipped in a small amount of soapy water to carefully scrub the humidifier's base, sink, air intake and other hard-to-reach corners. 4. Rinse thoroughly: Please rinse the humidifier thoroughly with clean water to ensure that no cleaner residue remains. 5. Air dry: Finally, place the humidifier in a cool, ventilated area to dry naturally, and do not allow direct sunlight to reach the unit.

Encountering a Poetic Night! Ambience Small Light Illuminates a Micro Romantic Corner

When choosing the installation location of solar wall lights, we suggest you consider the following points: Lighting conditions: Please try to choose a sunny, unobstructed wall to ensure that the solar panel can fully receive sunlight, thus improving the charging efficiency and length of use of the lamps and lanterns. Safety: Make sure the installation position of solar wall lights is stable to avoid the safety hazards caused by falling lamps. Lighting requirements: Determine the installation height according to your actual lighting requirements. Generally speaking, it is recommended to install it about 2 meters above the ground so that it can better illuminate the wall and the surrounding area. Aesthetics: Please consider the coordination between the soalr wall lights and the surrounding environment, and choose the appropriate installation position to enhance the overall aesthetics. We hope these suggestions will be helpful to you!

The solar panel has a light efficiency of 127Wp / m2, which has a high efficiency and is very beneficial to the wind-resistant design of the system; the lamp head part is integrated with a 1W white light LED and a 1W yellow light LED on a printed circuit board and arranged in a lattice with a certain pitch as a flat surface light source.