China Outdoor Path Lights Manufacturers, Suppliers, Factory

When choosing the installation location of solar wall lights, we suggest you consider the following points: Lighting conditions: Please try to choose a sunny, unobstructed wall to ensure that the solar panel can fully receive sunlight, thus improving the charging efficiency and length of use of the lamps and lanterns. Safety: Make sure the installation position of solar wall lights is stable to avoid the safety hazards caused by falling lamps. Lighting requirements: Determine the installation height according to your actual lighting requirements. Generally speaking, it is recommended to install it about 2 meters above the ground so that it can better illuminate the wall and the surrounding area. Aesthetics: Please consider the coordination between the soalr wall lights and the surrounding environment, and choose the appropriate installation position to enhance the overall aesthetics. We hope these suggestions will be helpful to you!

Landsign’s control of product details is very strict, in order to control the plastic parts of solar lights and humidifiers out of the machine can be well protected, are manually placed. For the parts of solar lights and humidifiers that are easily scratched and damaged, we have a protective film to ensure the exquisiteness of the products.

When using solar wall light, please pay attention to the following points to ensure its best performance and safety: 1. Installation location: Please make sure the solar panel is facing the sunny direction and avoid any shade, so that you can get a better charging effect. 2. Light time: It is recommended to ensure enough light time every day, usually at least five hours of unobstructed sunlight between 10:00 a.m. and 3:00 p.m. will help to improve its working efficiency. 3. Regular maintenance: In order to maintain the normal operation of the solar panel, please clean the dust and dirt on it regularly to ensure that it is always in good condition.

1. Measure and Mark: Use the measuring tape to determine the center of the post or pillar. Mark the spot where the solar post cap light will be mounted using a marker or pencil. 2. Attach the Mounting Hardware: If the solar post cap light comes with mounting hardware (such as screws and brackets), attach them to the base of the light. Use the screwdriver or drill to secure the mounting hardware to the post or pillar, aligning it with the marked center spot. 3. Install the Solar Post Cap Light: Place the solar post cap light onto the mounting hardware. Secure it in place by tightening any screws or bolts provided. 4. Adjust and Test: Once installed, ensure the solar panel is facing upwards and is not obstructed by any shading. Turn on the light (if it has a switch) and test it to make sure it is working properly. Adjust the brightness or dimming settings if the solar post cap light has these features.

Early-Morning Container Loading and Shipment Kicks Off at Landsign